Abbreviations
Please see our standard list of abbreviations.
Pattern Notes
The fabric portion of the bad is sewn first, and then the knit top is made and attached by handsewing it to the fabric.
All seam allowances are 1/4" unless otherwise noted.
Pattern
This bag works well with a charm pack of coordinating fabrics (5" x 5" squares). If you're starting with yard goods, cut 24 coordinating 5" squares.
Outer Panels
Arrange the squares into two 3 squares by 3 squares rectangles (one for each bag side). Sew the squares to each other with right sides together by sewing the squares into vertical strips of 3 squares each. Press seams open. Sew each strip to its neighbor strip for each side of the bag, ending with two panels of 3 squares by 3 squares each. Press seams open.
Cut interfacing to fit each side and apply to to wrong side of each panel.
Top stitch along both the left of right side of each seam a scant 1/4" in from each side of the seam.
Then, take both panels with right sides together and sew down one side, along the bottom, and up the other side. Trim corners and turn inside out. Press seams.
Lining
Cut 2 rectangles of fabric 13.75" x 13.75". With right sides together, sew down one side, along the bottom, and up the other side. Press seams; do not turn inside out.
Strap
Cut 2 strips of fabric 3" x 15-1/4". With right sides together, sew one of the short ends together to make a single strip 3" x 30". Press open. Fold fabric in half lengthwise with wrong sides together and press. Fold under each raw long raw edge to it meets the fold that you just made. Press under. You should now have a strip that is 4 thicknesses of fabric and is 3/4" x 30".
Edge stitch both sides of the strap.
Baste the strap to the top of the bag at each side seam with the raw edge of the strap matching up with the raw edge of the panels, taking care not to twist the strap.
Attach the Lining
Slip the lining (with right sides facing in) over the outer bag (with right sides facing out). The outer panel and the lining will be facing each other and the strap will be in between the two layers. Pin the panel to the lining.
Starting approx 1.5" in from the center front of one of the panels sew around the top of the bag leaving a 3" gap.
Turn the bag right side out and slip the lining inside the bag. Press the fold where the lining meets the bag. Pin the turning gap closed and edge stitch around the entire top of the bag, closing the gap.
Knitted Top
CO 120 sts and join for working in the rnd, taking care not to twist. Work 6 reps around of Cape May chart.
BO knitwise.
Finishing
Weave in ends.
Attach knitted top to fabric matching each repeat of the knitted edging to a seam in the bag. Tack down lower edge of knitted piece every half repeat to create scaloped bottom.